Recommendation of Tahiti acid lime cultivars through Bayesian probability models.

Probabilistic models enhance breeding, especially for the Tahiti acid lime, a fruit essential to fresh markets and industry. These models identify superior and persistent individuals using probability theory, providing a measure of uncertainty that can aid the recommendation. The objective of our study was to evaluate the use of a Bayesian probabilistic model for the recommendation of superior and persistent genotypes of Tahiti acid lime evaluated in 12 harvests. Leveraging the Monte Carlo Hamiltonian sampling algorithm, we calculated the probability of superior performance (superior genotypic value), and the probability of superior stability (reduced variance of the genotype-by-harvests interaction) of each genotype. The probability of superior stability was compared to a measure of persistence estimated from genotypic values predicted using a frequentist model. Our results demonstrated the applicability and advantages of the Bayesian probabilistic model, yielding similar parameters to those of the frequentist model, while providing further information about the probabilities associated with genotype performance and stability. Genotypes G15, G4, G18, and G11 emerged as the most superior in performance, whereas G24, G7, G13, and G3 were identified as the most stable. This study highlights the usefulness of Bayesian probabilistic models in the fruit trees cultivars recommendation.

Artificial intelligence to predict bed bath time in Intensive Care Units.

OBJECTIVES: to assess the predictive performance of different artificial intelligence algorithms to estimate bed bath execution time in critically ill patients. METHODS: a methodological study, which used artificial intelligence algorithms to predict bed bath time in critically ill patients. The results of multiple regression models, multilayer perceptron neural networks and radial basis function, decision tree and random forest were analyzed. RESULTS: among the models assessed, the neural network model with a radial basis function, containing 13 neurons in the hidden layer, presented the best predictive performance to estimate the bed bath execution time. In data validation, the squared correlation between the predicted values and the original values was 62.3%. CONCLUSIONS: the neural network model with radial basis function showed better predictive performance to estimate bed bath execution time in critically ill patients.

Artificial intelligence to predict bed bath time in Intensive Care Units / Inteligencia artificial para predecir la hora del baño en cama en Unidades de Cuidados Intensivos / Inteligência artificial para predição do tempo de banho no leito em Unidades de Terapia Intensiva

ABSTRACT Objectives: to assess the predictive performance of different artificial intelligence algorithms to estimate bed bath execution time in critically ill patients. Methods: a methodological study, which used artificial intelligence algorithms to predict bed bath time in critically ill patients. The results of multiple regression models, multilayer perceptron neural networks and radial basis function, decision tree and random forest were analyzed. Results: among the models assessed, the neural network model with a radial basis function, containing 13 neurons in the hidden layer, presented the best predictive performance to estimate the bed bath execution time. In data validation, the squared correlation between the predicted values and the original values was 62.3%. Conclusions: the neural network model with radial basis function showed better predictive performance to estimate bed bath execution time in critically ill patients.

RESUMEN Objetivos: evaluar el rendimiento predictivo de diferentes algoritmos de inteligencia artificial para estimar el tiempo de ejecución del baño en cama en pacientes críticos. Métodos: estudio metodológico, que utilizó algoritmos de inteligencia artificial para predecir el tiempo de baño en cama en pacientes críticos. Se analizaron los resultados de modelos de regresión múltiple, redes neuronales perceptrón multicapa y función de base radial, árbol de decisión y random forest. Resultados: entre los modelos evaluados, el modelo de red neuronal con función de base radial, que contiene 13 neuronas en la capa oculta, presentó el mejor desempeño predictivo para estimar el tiempo de ejecución del baño en cama. En la validación de datos, la correlación al cuadrado entre los valores predichos y los valores originales fue del 62,3%. Conclusiones: el modelo de red neuronal con función de base radial mostró mejor rendimiento predictivo para estimar el tiempo de ejecución del baño en cama en pacientes críticos.

RESUMO Objetivos: avaliar a performance preditiva de diferentes algoritmos de inteligência artificial para estimar o tempo de execução do banho no leito em pacientes críticos. Métodos: estudo metodológico, que utilizou algoritmos de inteligência artificial para predizer o tempo de banho no leito em pacientes críticos. Foram analisados os resultados dos modelos de regressão múltipla, redes neurais perceptron multicamadas e função de base radial, árvore de decisão e random forest. Resultados: entre os modelos avaliados, o modelo de rede neural com função de base radial, contendo 13 neurônios na camada oculta, apresentou melhor performance preditiva para estimar o tempo de execução do banho no leito. Na validação dos dados, o quadrado da correlação entre os valores preditos e os valores originais foi de 62,3%. Conclusões: o modelo de rede neural com função de base radial apresentou melhor performance preditiva para estimar o tempo de execução do banho no leito em pacientes críticos.

Understanding the combining ability of nutritional, agronomic and industrial traits in soybean F2 progenies.

Obtaining soybean genotypes that combine better nutrient uptake, higher oil and protein levels in the grains, and high grain yield is one of the major challenges for current breeding programs. To avoid the development of unpromising populations, selecting parents for crossbreeding is a crucial step in the breeding pipeline. Therefore, our objective was to estimate the combining ability of soybean cultivars based on the F2 generation, aiming to identify superior segregating parents and populations for agronomic, nutritional and industrial traits. Field experiments were carried out in two locations in the 2020/2021 crop season. Leaf contents of the following nutrients were evaluated: phosphorus, potassium, calcium, magnesium, sulfur, copper, iron, manganese, and zinc. Agronomic traits assessed were days to maturity (DM) and grain yield (GY), while the industrial traits protein, oil, fiber and ash contents were also measured in the populations studied. There was a significant genotype × environment (G × A) interaction for all nutritional traits, except for P content, DM and all industrial traits. The parent G3 and the segregating populations P20 and P27 can be used aiming to obtain higher nutritional efficiency in new soybean cultivars. The segregating populations P11 and P26 show higher potential for selecting soybean genotypes that combine earliness and higher grain yield. The parent G5 and segregant population P6 are promising for selection seeking improvement of industrial traits in soybean.

Genotype plus genotype by-environment interaction biplot and genetic diversity analyses on multi-environment trials data of yield and technological traits of cotton cultivars / Biplot de genótipo mais interação genótipo por ambiente e diversidade genética em dados de produtividade e qualidade de fibras em cultivares de algodão provenientes de ensaios multi-ambientes

Understanding the genetic diversity and overcoming genotype-by-environment interaction issues is an essential step in breeding programs that aims to improve the performance of desirable traits. This study estimated genetic diversity and applied genotype + genotype-by-environment (GGE) biplot analyses in cotton genotypes. Twelve genotypes were evaluated for fiber yield, fiber length, fiber strength, and micronaire. Estimation of variance components and genetic parameters was made through restricted maximum likelihood and the prediction of genotypic values was made through best linear unbiased prediction. The modified Tocher and principal component analysis (PCA) methods, were used to quantify genetic diversity among genotypes. GGE biplot was performed to find the best genotypes regarding adaptability and stability. The Tocher technique and PCA allowed for the formation of clusters of similar genotypes based on a multivariate framework. The GGE biplot indicated that the genotypes IMACV 690 and IMA08 WS were highly adaptable and stable for the main traits in cotton. The cross between the genotype IMACV 690 and IMA08 WS is the most recommended to increase the performance of the main traits in cotton crops.

Compreender a diversidade genética e contornar os problemas causados pela interação genótipos por ambientes é uma etapa importante em programas de melhoramento. Este estudo teve como objetivo estimar a diversidade genética e aplicar a metodologia de biplot genótipo + genótipo por ambiente (GGE biplot) em doze genótipos de algodão avaliados quanto ao rendimento da fibra, comprimento da fibra, resistência da fibra e micronaire. A estimativa dos componentes de variância e dos parâmetros genéticos foi feita através do método da máxima verossimilhança restrita e a predição dos valores genotípicos por meio da melhor predição linear não enviesada. Os métodos de Tocher modificado e análise de componentes principais (PCA) foram utilizados para quantificar a diversidade genética entre os genótipos. O método GGE biplot foi conduzido para encontrar os melhores genótipos em relação à adaptabilidade e estabilidade. As técnicas de Tocher e PCA permitiram a formação de clusters de genótipos semelhantes com base em uma estrutura multivariada. O GGE biplot indicou que os genótipos IMACV 690 e IMA08 WS foram altamente adaptáveis e estáveis para as principais características do algodão. O cruzamento dentre os genótipos IMACV 690 e IMA08 WS é o mais recomendado para aumentar o desempenho das principais características na cultura do algodão.

Accounting for spatial trends in multi-environment diallel analysis in maize breeding.

Spatial trends represent an obstacle to genetic evaluation in maize breeding. Spatial analyses can correct spatial trends, which allow for an increase in selective accuracy. The objective of this study was to compare the spatial (SPA) and non-spatial (NSPA) models in diallel multi-environment trial analyses in maize breeding. The trials consisted of 78 inter-populational maize hybrids, tested in four environments (E1, E2, E3, and E4), with three replications, under a randomized complete block design. The SPA models accounted for autocorrelation among rows and columns by the inclusion of first-order autoregressive matrices (AR1 ⊗ AR1). Then, the rows and columns factors were included in the fixed and random parts of the model. Based on the Bayesian information criteria, the SPA models were used to analyze trials E3 and E4, while the NSPA model was used for analyzing trials E1 and E2. In the joint analysis, the compound symmetry structure for the genotypic effects presented the best fit. The likelihood ratio test showed that some effects changed regarding significance when the SPA and NSPA models were used. In addition, the heritability, selective accuracy, and selection gain were higher when the SPA models were used. This indicates the power of the SPA model in dealing with spatial trends. The SPA model exhibits higher reliability values and is recommended to be incorporated in the standard procedure of genetic evaluation in maize breeding. The analyses bring the parents 2, 10 and 12, as potential parents in this microregion.

Increasing selection gain and accuracy of harvest prediction models in Jatropha through genome-wide selection.

Genome-wide selection (GWS) has been becoming an essential tool in the genetic breeding of long-life species, as it increases the gain per time unit. This study had a hypothesis that GWS is a tool that can decrease the breeding cycle in Jatropha. Our objective was to compare GWS with phenotypic selection in terms of accuracy and efficiency over three harvests. Models were developed throughout the harvests to evaluate their applicability in predicting genetic values in later harvests. For this purpose, 386 individuals of the breeding population obtained from crossings between 42 parents were evaluated. The population was evaluated in random block design, with six replicates over three harvests. The genetic effects of markers were predicted in the population using 811 SNP's markers with call rate = 95% and minor allele frequency (MAF) > 4%. GWS enables gains of 108 to 346% over the phenotypic selection, with a 50% reduction in the selection cycle. This technique has potential for the Jatropha breeding since it allows the accurate obtaining of GEBV and higher efficiency compared to the phenotypic selection by reducing the time necessary to complete the selection cycle. In order to apply GWS in the first harvests, a large number of individuals in the breeding population are needed. In the case of few individuals in the population, it is recommended to perform a larger number of harvests.

Multiple-trait model through Bayesian inference applied to Jatropha curcas breeding for bioenergy.

Multiple-trait model tends to be the best alternative for the analysis of repeated measures, since they consider the genetic and residual correlations between measures and improve the selective accuracy. Thus, the objective of this study was to propose a multiple-trait Bayesian model for repeated measures analysis in Jatropha curcas breeding for bioenergy. To this end, the grain yield trait of 730 individuals of 73 half-sib families was evaluated over six harvests. The Markov Chain Monte Carlo algorithm was used to estimate genetic parameters and genetic values. Genetic correlation between pairs of measures were estimated and four selective intensities (27.4%, 20.5%, 13.7%, and 6.9%) were used to compute the selection gains. The full model was selected based on deviance information criterion. Genetic correlations of low (ρg ≤ 0.33), moderate (0.34 ≤ ρg ≤ 0.66), and high magnitude (ρg ≥ 0.67) were observed between pairs of harvests. Bayesian analyses provide robust inference of genetic parameters and genetic values, with high selective accuracies. In summary, the multiple-trait Bayesian model allowed the reliable selection of superior Jatropha curcas progenies. Therefore, we recommend this model to genetic evaluation of Jatropha curcas genotypes, and its generalization, in other perennials.

Quantile regression in genomic selection for oligogenic traits in autogamous plants: A simulation study.

This study assessed the efficiency of Genomic selection (GS) or genome-wide selection (GWS), based on Regularized Quantile Regression (RQR), in the selection of genotypes to breed autogamous plant populations with oligogenic traits. To this end, simulated data of an F2 population were used, with traits with different heritability levels (0.10, 0.20 and 0.40), controlled by four genes. The generations were advanced (up to F6) at two selection intensities (10% and 20%). The genomic genetic value was computed by RQR for different quantiles (0.10, 0.50 and 0.90), and by the traditional GWS methods, specifically RR-BLUP and BLASSO. A second objective was to find the statistical methodology that allows the fastest fixation of favorable alleles. In general, the results of the RQR model were better than or equal to those of traditional GWS methodologies, achieving the fixation of favorable alleles in most of the evaluated scenarios. At a heritability level of 0.40 and a selection intensity of 10%, RQR (0.50) was the only methodology that fixed the alleles quickly, i.e., in the fourth generation. Thus, it was concluded that the application of RQR in plant breeding, to simulated autogamous plant populations with oligogenic traits, could reduce time and consequently costs, due to the reduction of selfing generations to fix alleles in the evaluated scenarios.

Soybean productivity, stability, and adaptability through mixed model methodology / Produtividade, estabilidade e adaptabilidade da soja por meio de metodologia de modelo misto

ABSTRACT: The genotype × environment (G×E) interaction plays an essential role in phenotypic expression and can lead to difficulties in genetic selection. Thus, the present study aimed to estimate genetic parameters and to compare different selection strategies in the context of mixed models for soybean breeding. For this, data referring to the evaluation of 30 genotypes in 10 environments, regarding the grain yield trait, were used. The variance components were estimated through restricted maximum likelihood (REML) and genotypic values were predicted through best linear unbiased prediction (BLUP). Significant effects of genotypes and G×E interaction were detected by the likelihood ratio test (LRT). Low genotypic correlation was obtained across environments, indicating complex G×E interaction. The selective accuracy was very high, indicating high reliability. Our results showed that the most productive soybean genotypes have high adaptability and stability.

RESUMO: A interação genótipo × ambiente (G × E) desempenha um papel essencial na expressão fenotípica e pode provocar dificuldades na seleção genética. Assim, o presente estudo teve como objetivo estimar parâmetros genéticos e comparar diferentes estratégias de seleção no contexto de modelos mistos para melhoramento da soja. Para isso, foram utilizados dados referentes à avaliação de 30 genótipos em dez ambientes, referentes à característica produtividade de grãos. Os componentes de variância foram estimados pela máxima verossimilhança restrita (REML) e os valores genotípicos foram preditos pela melhor previsão imparcial linear (BLUP). Efeitos significativos dos genótipos e interação G × E foram detectados pelo teste da razão de verossimilhança (LRT). Correlação genotípica baixa foi obtida entre os ambientes indicando interação G × E do tipo complexa. A acurácia seletiva foi muito alta, indicando alta confiabilidade. Os resultados mostraram que os genótipos de soja mais produtivos apresentam alta adaptabilidade e estabilidade.

Models for optimizing selection based on adaptability and stability of cotton genotypes / Modelos para otimizar a seleção baseada em adaptabilidade e estabilidade de genótipos de algodão

ABSTRACT: In multi-environment trials (MET), large networks are assessed for results improvement. However, genotype by environment interaction plays an important role in the selection of the most adaptable and stable genotypes in MET framework. In this study, we tested different residual variances and measure the selection gain of cotton genotypes accounting for adaptability and stability, simultaneously. Twelve genotypes of cotton were bred in 10 environments, and fiber length (FL), fiber strength (FS), micronaire (MIC), and fiber yield (FY) were determined. Model selection for different residual variance structures (homogeneous and heterogeneous) was tested using the Akaike Information Criterion (AIC) and Bayesian Information Criterion (BIC). The variance components were estimated through restricted maximum likelihood and genotypic values were predicted through best linear unbiased prediction. The harmonic mean of relative performance of genetic values (HMRPGV) were applied for simultaneous selection for adaptability, stability, and yield. According to BIC heterogeneous residual variance was the best model fit for FY, whereas homogeneous residual variance was the best model fit for FL, FS, and MIC traits. The selective accuracy was high, indicating reliability of the prediction. The HMRPGV was capable to select for stability, adaptability and yield simultaneously, with remarkable selection gain for each trait.

RESUMO: Em ensaios multi-ambientes, grandes redes experimentais são utilizadas para a avaliação de genótipos, tentando contornar o efeito que a interação genótipo por ambiente desempenha na seleção genotípica. Neste estudo, objetivamos testar diferentes estruturas de variância residual e medir o ganho de seleção de genótipos de algodão, baseados em produtividade, adaptabilidade e estabilidade, simultaneamente. Doze genótipos de algodão foram plantados em 10 ambientes, sendo determinados o comprimento da fibra (CF), a resistência da fibra (RF), a micronaire (MIC) e produtividade de fibras (PF). A seleção do modelo para diferentes estruturas de variância residual (homogênea e heterogênea) foi testada usando o Critério de Informação de Akaike (AIC) e o Critério de Informação Bayesiano (BIC). Os componentes de variância foram estimados através de máxima verossimilhança restrita e os valores genotípicos foram preditos através da melhor predição linear não viesada. A média harmônica do desempenho relativo dos valores genéticos (HMRPGV) foram aplicadas para seleção simultânea para adaptabilidade, estabilidade e produtividade. De acordo com o BIC, a estrutura residual heterogênea apresentou o melhor ajuste para a característica PF, enquanto a estrutura residual homogênea apresentou o melhor ajuste para as características CF, RF e MIC. A acurácia seletiva foi alta, indicando confiabilidade da predição. O método HMRPGV foi capaz de selecionar para estabilidade, adaptabilidade e produtividade, simultaneamente, com notável ganho de seleção para cada característica.

Random regression for modeling yield genetic trajectories in Jatropha curcas breeding.

Random regression models (RRM) are a powerful tool to evaluate genotypic plasticity over time. However, to date, RRM remains unexplored for the analysis of repeated measures in Jatropha curcas breeding. Thus, the present work aimed to apply the random regression technique and study its possibilities for the analysis of repeated measures in Jatropha curcas breeding. To this end, the grain yield (GY) trait of 730 individuals of 73 half-sib families was evaluated over six years. Variance components were estimated by restricted maximum likelihood, genetic values were predicted by best linear unbiased prediction and RRM were fitted through Legendre polynomials. The best RRM was selected by Bayesian information criterion. According to the likelihood ratio test, there was genetic variability among the Jatropha curcas progenies; also, the plot and permanent environmental effects were statistically significant. The variance components and heritability estimates increased over time. Non-uniform trajectories were estimated for each progeny throughout the measures, and the area under the trajectories distinguished the progenies with higher performance. High accuracies were found for GY in all harvests, which indicates the high reliability of the results. Moderate to strong genetic correlation was observed across pairs of harvests. The genetic trajectories indicated the existence of genotype × measurement interaction, once the trajectories crossed, which implies a different ranking in each year. Our results suggest that RRM can be efficiently applied for genetic selection in Jatropha curcas breeding programs.

A feasible method to extract DNA from the cambium of high-canopy trees: from harvest to assessment

Muitas árvores tropicais possuem dossel alto e folhas não facilmente acessíveis. O uso de tecido de um órgão mais acessível (câmbio) para extração de DNA pode ser uma alternativa para estudos moleculares. Nós adaptamos uma metodologia viável para extrair DNA genômico de tecido cambial coletado no campo para avaliação com PCR. Testamos três condições de armazenamento (dois tampões e sílica gel) e quatro períodos após a coleta. Utilizamos protocolos descritos anteriormente e os testamos em três espécies encontradas em florestas amazônicas e outros biomas: Anadenanthera peregrina var. peregrina, Cedrela fissilis e Ceiba speciosa. Nosso protocolo foi eficaz na obtenção de DNA adequado para sequenciamento e genotipagem de microssatélites. Recomendamos o uso de sílica para armazenamento de longo prazo e o tampão com ácido ascórbico para curto prazo. (AU)

Multiple-trait, random regression, and compound symmetry models for analyzing multi-environment trials in maize breeding.

An efficient and informative statistical method to analyze genotype-by-environment interaction (GxE) is needed in maize breeding programs. Thus, the objective of this study was to compare the effectiveness of multiple-trait models (MTM), random regression models (RRM), and compound symmetry models (CSM) in the analysis of multi-environment trials (MET) in maize breeding. For this, a data set with 84 maize hybrids evaluated across four environments for the trait grain yield (GY) was used. Variance components were estimated by restricted maximum likelihood (REML), and genetic values were predicted by best linear unbiased prediction (BLUP). The best fit MTM, RRM, and CSM were identified by the Akaike information criterion (AIC), and the significance of the genetic effects were tested using the likelihood ratio test (LRT). Genetic gains were predicted considering four selection intensities (5, 10, 15, and 20 hybrids). The selected MTM, RRM, and CSM models fit heterogeneous residuals. Moreover, for RRM the genetic effects were modeled by Legendre polynomials of order two. Genetic variability between maize hybrids were assessed for GY. In general, estimates of broad-sense heritability, selective accuracy, and predicted selection gains were slightly higher when obtained using MTM and RRM. Thus, considering the criterion of parsimony and the possibility of predicting genetic values of hybrids for untested environments, RRM is a preferential approach for analyzing MET in maize breeding.

Understanding the combining ability for physiological traits in soybean.

Photosynthetic efficiency has become the target of several breeding programs since the positive correlation between photosynthetic rate and yield in soybean suggests that the improvement of photosynthetic efficiency may be a promising target for new yield gains. However, studies on combining ability of soybean genotypes for physiological traits are still scarce in the literature. The objective of this study was to estimate the combining ability of soybean genotypes based on F2 generation aiming to identify superior parents and segregating populations for physiological traits. Twenty-eight F2 populations resulting from partial diallel crossings between eleven lines were evaluated in two crop seasons for the physiological traits: photosynthesis, stomatal conductance, internal CO2 concentration, and transpiration. General combining ability (GCA) of the parents and specific combining ability (SCA) of the F2 populations were estimated. Our findings reveal the predominance of additive effects in controlling the traits. The genotype TMG 7062 IPRO is the most promising parent for programs aiming at photosynthetic efficiency. We have also identified other promising parents and proposed cross-breeding with higher potential for obtaining superior lines for photosynthetic efficiency.

Estimates of genetic divergence in cowpea by multivariate analysis in different environments / Estimativa de divergência genética em feijão-caupi por meio de análise multivariada em diferentes ambientes

Cowpea is a legume of great importance in the Brazilian nutrition, mainly in the Northeast region. Despite the low yield of Brazilian cowpea, the species presents a genetic potential to be explored. Thus, this work aimed to characterize the genetic diversity of cowpea genotypes by agronomic traits and select genotypes for possible crosses by multivariate analysis. Four value for cultivation and use tests were carried out with cowpea genotypes in 2005 and 2006, in the municipalities of Aquidauana, Chapadão do Sul, and Dourados, in the state of Mato Grosso do Sul. The experimental design was a complete randomized block with 20 genotypes and four replications. The evaluated traits were value for cultivation, plant lodging, pod length, grain weight of five pods, number of grains per pod, pod weight, severity of powdery mildew, and grain yield. To estimate the genetic diversity among the genotypes, the optimization methods of Tocher and UPGMA were used. The generalized distance of Mahalanobis was used as a dissimilarity measure. The clustering methods revealed genetic variability among the cowpea genotypes evaluated. The methods used formed a different number of groups for each environment. Genotypes TE97-309G-24, MNC99-542F-5, BRS Paraguaçu, BRS Paraguaçu, BR 17-Gurguéia, and CNC x 409-11F-P2 can be used to obtain promising combinations and high genetic variability.

O feijão-caupi é de grande importância na nutrição brasileira, principalmente na região Nordeste. Apesar do baixo rendimento do feijão-caupi no Brasil, esta leguminosa apresenta potencial genético a ser explorado. Dessa forma, o objetivo do trabalho foi caracterizar a variabilidade genética de caracteres agronômicos e estimar a divergência genética entre genótipos de feijão-caupi por meio de análise multivariada. Quatro ensaios de valor de cultivo e uso com genótipos de feijão-caupi foram conduzidos nos anos de 2005 e 2006, nos municípios de Aquidauana, Chapadão do Sul e Dourados. Os experimentos foram conduzidos em delineamento blocos casualizados, com 20 genótipos e quatro repetições. Os caracteres avaliados foram acamamento de plantas, comprimento de vagem, peso de grãos de cinco vagens, número de grãos por vagem, peso de vagem e produtividade de grãos. Realizou-se análise de variância individual e conjunta. Para estimar a diversidade genética entre os genótipos, foram utilizados o métodos de otimização de Tocher e UPGMA. A distância generalizada de Mahalanobis foi utilizada como medida de dissimilaridade. Foi possível detectar variabilidade genética entre os genótipos de feijão-caupi avaliados por meio dos métodos de agrupamento utilizados. Os métodos utilizados formaram números de grupos distintos para cada ambiente. Os genótipos TE97-309G-24, MNC99-542F-5, BRS Paraguaçu, BRS Paraguaçu, BR 17-Gurguéia e CNC x 409-11F-P2 podem ser usados para obter combinações promissoras e elevada variabilidade genética.

Environmental stratification in the brazilian cerrado on the yield and fiber quality of cotton genotypes / Estratificação ambiental no cerrado brasileiro sobre o rendimento e a qualidade da fibra dos genótipos de algodão

Environmental stratification studies are important for the plant breeding, since they allow to adequately plan the experimental network. The objective of this work was to identify similar environments for cotton cultivation in the Brazilian Cerrado regarding yield and fiber quality. Nineteen field studies were carried out in a randomized complete block design with twelve genotypes and four replicates. Agronomic (cotton seed yield and fiber percentage) and technological traits (length, micronaire, fiber strength) were evaluated. These results indicate that there are six environments (PVA3, MON, SHE1, SIN, PPA e TRIN) in which the cotton trials should be installed as a matter of priority owing to the phenotypic response pattern obtained for the evaluated traits. The remaining 13 environments are similar to each other for all traits and can be summarized in strategic locations depending on the ease of installation of the trials

Os estudos de estratificação ambiental são importantes para a criação de plantas, uma vez que permitem planejar adequadamente a rede experimental. O objetivo deste trabalho foi identificar ambientes similares para cultivo de algodão no Cerrado brasileiro quanto a produtividade e qualidade da fibra. Dezenove experimentos foram realizados em um delineamento de blocos ao acaso com doze genótipos e quatro repetições. Foram avaliados caracteres agronômicos (produtividade de algodão em caroço e porcentagem de fibra) e tecnológicas (comprimento, micronaire, resistência de fibras). Os resultados indicam que existem seis ambientes (PVA3, MON, SHE1, SIN, PPA e TRIN) em que os ensaios de algodão devem ser instalados como prioritários devido ao padrão de resposta fenotípica obtido para os traços avaliados. Os 13 ambientes restantes são semelhantes entre si para todos os caracteres e podem ser resumidos em locais estratégicos, de acordo com a facilidade de instalação dos ensaios.

Indirect response in genome wide selection using selected markers / Resposta indireta na seleção genômica ampla usando seleção de marcadores

The goal of this work was to compare the effect of the accuracy and residual variance in genome wide selection using marker selection as well as using the effect of the indirect selection, using simulated and real data. In simulated data was used one sample with 200 individuals with 1,000 molecular markers in F2 population. The real data was obtained in maize with F2 population with 441 individuals and genotyping with 261 SSR markers. There was 11 traits evaluated (ear length, ear width, row number, kernels per row, 100-kernel weight, ear weight, grain yield, length of branch, number of branch, plant height and ear height). All data was analyzed using rrBLUP method and 10-fold cross-validation. In simulated and maize data the results were similar: the residual variance with few markers is lower than with the 1000 markers and the accuracy with few markers is bigger than with 1000 markers. For maize data multi trait selection, the accuracy increased when the correlation between traits is greater than 0.50 and residual variance decreased when the correlation is greater than 0.70. In this sense, these results showed that marker selection could be used as a first step in genome wide selection, improving the prediction and compute demand.

O objetivo deste trabalho foi comparar o efeito da precisão e da variância residual na seleção genômica ampla utilizando a seleção de marcadores, bem como utilizando o efeito da seleção indireta, utilizando dados simulados e reais. Foram usados simulados de uma amostra com 200 indivíduos com 1.000marcadores moleculares na população F2. Os dados reais foram obtidos em milho com população F2 com 441indivíduos e genotipagem com 261 marcadores SSR. Foram avaliados 11 caracteres (comprimento da espiga,largura da espiga, número da linha, grãos por linha, peso de 100 grãos, peso da espiga, produtividade de grãos, comprimento da espiga, número de espigas, altura da planta e altura da espiga). Todos os dados foram analisados usando o método rrBLUP, sendo realizada 10 vezes a validação cruzada. Em dados simulados e de milho, os resultados foram semelhantes: a variância residual com poucos marcadores é menor do que com os marcadores 1000 e a precisão com poucos marcadores é maior do que com os marcadores 1000. Para a seleção multi-característica dos dados do milho, a precisão aumentou quando a correlação entre as características é maior que 0,50 e a variância residual diminuiu quando a correlação é maior que 0,70. Nesse sentido, esses resultados mostraram que a seleção de marcadores poderia ser usada como um primeiro passo na seleção genômica ampla, melhorando a previsão e a demanda computacional.

Correction: The number of measurements needed to obtain high reliability for traits related to enzymatic activities and photosynthetic compounds in soybean plants infected with Phakopsora pachyrhizi.

[This corrects the article DOI: 10.1371/journal.pone.0192189.].

Jatropha half-sib family selection with high adaptability and genotypic stability.

Jatropha (Jatropha curcas) has become one of the most important species for producing biofuels. Currently, Genotype x Environment (GxE) interaction is the biggest challenge that breeders should solve to increase the section accuracy in the plant breeding. Therefore, the objectives in this study were to estimate the parameters in the 180 half-sib families in Jatropha evaluated for five production years, to verify the significance of the GxE interaction variance, to evaluate the adaptability and stability for each family based on three prediction methods, to select superior half-sib families based on the adaptability and stability analyses, and to predict the accuracy for the sixth production year. Jatropha half-sib families were classified and selected using the follow adaptability and stability methods: linear regression, bi-segmented linear regression and mixed models concepts called harmonic mean of the relative performance of genetic values (HMRPGV). The prediction accuracy was estimated by the Pearson correlation between the predicted genetic values by adaptability and stability methods and the phenotypic value in the sixth production year. In result, most half-sib families were classified as general adaptability and general stability for the evaluated traits. The selection gain obtained via HMRPGV was higher than other methods. The prediction accuracy for the sixth production year was 0.45. Therefore, HMRPGV is efficient to maximize the genetic gain, and it can be a useful strategy to select genotype with high adaptability and stability in Jatropha breeding as well as other species that should be evaluated for many years to take a suitable selection accuracy.